1. <form id="r9art"><th id="r9art"></th></form>

        1. Products

          Addr : Feng Jin Road No. 365 Fengxian District Shanghai

          Tel : 0086-21-57292666

          Domestic : 0086-21-57292997

          International : 0086-21-57294908

          Fax : 0086-21-57292999

          Zip : 201401

          Current:Home > Product > Gate valve
          Gate Valve



          Products Design Features
          1. The valve body has two structures of casting and welding. The short non-diversion hole flat gate valve adopts welding structure, which is short in length, light-weighted and specially fit for devices demanding light weight.
          2. The floating seat structure makes it possible to seal both director of the valve.
          3. The valve seat sealing adopts double-seals. PTFE can remove granule ad dirties to ensure a perfect sealing.
          4. Hard sealing surface is build-up welded on sealing surface with cobalt base stellite which results in a hardness of HRC44-52 to ensure sealing reliability.
          5. Valve with diversion hole, either full-open or full-open or full-closed, the disc will be kept in contact with seat so that the sealing surface will not be washed out directly by mediums and the valve will become more durable.
          6. The fire-resistant design of the valve complies with API 6Fa and API 607 standards. As for valves applied to hydrocarbon liquids and oil gas pipelines, to the carry these out standards will fulfill firefighting tasks.
          7. When the valve is in full-opening, the passage is a straight pipeline with small fluid resistance coefficient and little pressure loss. It can be cleaned by passing a wool ball.
          8. The valve has got a automatic pressure relief device which can ensure operation security.
          9. The valve adopts full-shut structure which has good protection function and can be used in all weather.

          Flow characteristic
          The flow characteristic of flat gate valves with a diversion hole is equal to that of pipelines of the same specification. The characteristic is shown in per centum form. As for valves without a diversion hole its cavity fly span is smaller than that of wedge gate vales and it is a regular cylindrical object, therefore, characteristics of the valves are similar except that they have a larger pressure loss. Besides, their flux adjustment behavior is better than that of the ones with a diversion hole.

          Standard Criteria: ASME/ANSI/API 

          Performance & Dimensions

          Standard Criterial:  ASME/ANSI/API

          Pressure Rating:Class150~Class900

          Valve Size: 25 mm~ 1000 mm 1”~40”

          Actuator: Bevel Gear  Electric  Handwheel  Hydraulic  Pneumatic

          ConnectionButt Welding Flange

          MediumCorrosive MediumNatural gasOil Petroleum

          Medium Temperature -196~550

          Structural styleLifter (visibal bar)parallel rigid single-slid 

          ConstructionFeature Construction, Electricity, General Industrial, Municipal Oil and Gas Production Petrochemical, Power Station 

          Blow Down Stopple: A276-304 A276-420
          rease Injection Joint A105

          Body Material A216 WCB

          DiscA276-304 A276-410


          Packing Seat PTFE

          Spacer Ring A276-420


          Indicating Finger A276-420

          Gasket B12.10-304/F.G

          BonnetA216 WCB

          Stud A193-B7

          NutA194 2H

          YokeA216 WCB

          Yoke NutC95500

          Gland A105

          Hand Wheel A536-60-40-18

          Indicating Cover A105

          Design Standard API 6D ASME B 16.34

          Connection Standard ASME B 16.25 ASME B 16.5 MSS SP-44

          Test Standard API 598 API 6D JB/T 9092-1999

          Face to Face API 598 API 6D


          ?  Copyright ?  2005 www.www.work-from-homebliss.com All rights reserved.
          Address: #365 Fengjin Road, Fengxian District, Shanghai P. R.C.   0086-21-57292666 57294908   E-mail: export@www.work-from-homebliss.com